Safety Recommendations - S&P TURBO-3000 Instrucciones De Uso

Operating instructions
The TURBO-3000 cooling fan is the
most effi cient solution to the discomfort
caused by excessive heat and it creates a
fresh and healthy atmosphere. Its design
and development has been carried out
using the most advanced technology
to ensure that the product will be safe,
effi cient and practical in operation.
We recommend that the appliance is
checked immediately on unpacking it, as
any manufacturing fault is covered by
the S&P guarantee.

Safety recommendations

– Ensure that the voltage and frequency
of the mains supply are as stated on
the rating plate of the unit, situated
beneath the terminal box.
– This appliance must be earthed. The
use of adapters or multiple sockets is
not recommended.
– The grilles should be kept clean at all
times.
– In the event of damage to the mains
fl ex, this should only be replaced by
a qualifi ed electrician or an offi cialy
appointed after sales service
organisation.
Operation
Once the voltage and frequency have
been checked, connect to the mains
supply.
The switch has three positions (Fig. 1):
0 = Stop
I = Low speed
II = High speed
Tilting head
The Turbo-3000 cooling fan is provided
with an adjustable head, which can be
adjusted by simply pushing it up or
down.
Important
The removal of any or component other
than those specifi cally mentioned is not
recommended, as any unauthorised
interface would automatically cancel the
S&P guarantee. If you detec any fault,
please contact your S&P dealer.
230 V ~ 50 Hz 130 W