General Safety Rules - S&P HTD-130 MR Manual De Instalacion E Instrucciones De Uso

ENGLISH
Caution : For safe operation and installation, read all instructions carefully.
Neither the manufacture nor the manufacturer's agent/distributor nor the retailer from whom
this product was purchased shall be in any way responsible for any loss or damage of whatever
nature caused by the installation of this product.

GENERAL SAFETY RULES

To ensure the success of the Ceiling Fan's installation, be sure to read the following general
safety rules before begining.
1- The Ceiling Fan installation should be carried out by a qualified electrician.
2- To ensure a correct installation, be sure to read the instructions and review the diagrams
thoroughly before commencement.
3- All electrical connections must be carried out in accordance with local codes and regulations,
or the national Electrical Code. If you are unfamiliar with the installation of electrical wiring,
secure the services of a qualified electrician.
4- Electrical supply 230V AC 50 Hz.
5- This apparatus must be earthed.
6- The method of disconnection from the mains supply must incorporate a switch or isolator
with a minimum contact separation of 3 mm. on all poles.
7- Make sure that when the fan is fitted in the chosen position, there is no possibility of the
rotating blades coming into contact with any object. Blades should be at least 2.30 m from
floor when fan is hung.
8- If you are installing more than one ceiling fan make sure that you do not mix fan blade sets,
even though they are from the same ceiling fan model.
9- Before beginning, disconnect power by removing fuse or turning off circuit breaker.
10- Once fan installation is completed make sure that all connections are secure to prevent fan
from falling.
11- Do not insert anything into the fan blades when ceiling fan is operating.
12- Fan must be turned off and stopped before reversing fan direction.
13- In semi-outdoor applications (porch, covered terraces...etc) blades can absorb moisture
and eventually become deformed. If not using the unit for a long period of time (example:
Winter) blades must be removed and stored in a dry place. If the same installation includes
several devices of the same type, remember not to mix blades as these are selected and
fitted considering their weight.
IMPORTANT NOTE: The warnings, safeguards and instructions given in this manual are not
exhaustive and do not necessarily cover all eventualities. It must be understood that common
sense, caution and care are factors which cannot be built into any product. These factors must
be supplied by the person(s) caring for and operating the unit.
13