Retrofit Receiver Module - Festool CT-F I Manual De Instrucciones Original

6.1

Retrofit receiver module

WARNING
Risk of injury, electric shock
► Always disconnect the mains plug
from the socket before performing
any work on the machine.
► Only authorised electricians are
allowed to install the retrofit re­
ceiver module.
► After installation, perform an elec­
trical safety test in compliance
with the applicable regulations.
Installation [4]
► Remove the hexagon socket
screws from the top and bottom of
the cover plate.
► Take the cover plate off the mo­
bile dust extractor.
► Plug in the retrofit receiver
module in compliance with the elec­
tronics on the mobile dust extractor.
► Tighten the hexagon socket
screws at the top and bottom on the
retrofit receiver module.
English
31