Festool CT-F I Manual De Instrucciones Original página 42

English
Problem
The mobile dust
extractor does
not receive a sig­
nal from a con­
nected remote
control
42
Possible causes
The connection parameters
on the remote control and
mobile dust extractor no
longer match.
Remedy
All devices saved in the ret­
rofit receiver module are
deleted.
Resetting the remote con­
trol
Hold down the connection
button [1-1] and the MAN
button [1-3] on the remote
control for 10 seconds.
The LED indicator flashes
purple if the reset has been
successful. The remote
control can be connected to
the mobile dust extractor