Product Components; Installation; Attach The Panel To A Wall - Hach 8362 sc Manual Del Usuario

Figure 1 Product overview
1 Controller connector
2 Temperature sensor
3 Protective earth ground
4 pH or ORP electrode

Product components

The panel is assembled at the factory with all the components attached and plumbed.

Installation

Multiple hazards. Only qualified personnel must conduct the tasks described in this section of the
document.

Attach the panel to a wall

Attach the panel vertically to a wall or structure that is able to hold at minimum 15 kg (32 lb) of
downward force. Use a location where the flow meter and junction box are accessible. Refer to
Figure 2.
User-supplied hardware:
• Four bolts, 10 × 40 mm (7/16 × 1.5 in.)
5 Sample inlet
6 Flow chamber
7 Drain connector
8 Flow meter
C A U T I O N
English 5