Description; Technical Data - Hilti DC-SE 20 Manual De Instrucciones

Symbols
Revolutions Revolutions
per minute per minute
en

2 Description

2.1 Use of the product as directed
The DC-SE 20 is an electrically powered slitting machine
for professional use.

3 Technical data

Right of technical changes reserved.
Rated voltage
Rated current
input
Rated power
AC frequency
NOTE
Information for users as per EN 61000-3-11: Switching on causes a brief drop in voltage. Other appliances may be
negatively affected on mains supplies where conditions are unfavorable. No malfunctions are to be expected in mains
supplies with an impedance of less than 0.15 ohms.
Diameter of the diamond cutting discs
Thickness of the diamond cutting discs
Diamond cutting disc arbor size
Weight in accordance with EPTA procedure 01/2003
Rated speed
Protection class
NOTE
The vibration emission level given in this information sheet has been measured in accordance with a standardised test
given in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment
of exposure. The declared vibration emission level represents the main applications of the tool. However if the tool is
used for different applications, with different accessories or is poorly maintained, the vibration emission may differ.
This may significantly increase the exposure level over the total working period. An estimation of the level of exposure
to vibration should also take into account the times when the tool is switched off or when it is running but not actually
doing the job. This may significantly reduce the exposure level over the total working period. Identify additional safety
measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.
Noise and vibration information (measured in accordance with EN 60745‑2‑22)
Typical A-weighted emission sound pressure level
Typical A-weighted sound power level
12
Return
materials for
recycling
110 V 120 V
16 A
1,700 W 1,800 W
50...60 Hz 60 Hz
Location of identification data on the machine
The type designation and serial number can be found on
the type identification plate on the machine. Make a note
of this data in your operating instructions and always refer
to it when making an enquiry to your Hilti representative
or service department.
Type:
Serial no.:
The machine is designed for use with diamond cutting
discs.
The machine is designed to be used with a suitable
vacuum cleaner.
220 V 230 V
8.7 A 9.2 A
1,800 W 1,950 W
50...60 Hz 50...60 Hz
Max. 125 mm
Max. 2 mm
22.2 mm
6.9 kg
7,900/min
Protection class II (double-insulated)
100 dB (A)
111 dB (A)
240 V
8.8 A
1,950 W
50...60 Hz