Advanced Bionics Naída CI Q70 Manual Instrucciones De Uso página 8

Using the Naída CI Q70 Sound Processor
Powering the Naída CI
The processor is turned 'on' when a charged battery is
attached to the processor. In order to power 'off' the pro-
cessor, the battery cartridge must be removed. When the
battery is engaged, the orange LED located in the middle
of the rocker switch will flash to indicate battery charge.
The Naída CI will always power on in Program 1 with
the volume and sensitivity at the default settings.
To power down the Naída CI, simply remove the battery
cartridge.
Note: The T-Mic 2 Cover should be replaced at regular
intervals to maintain sound quality.
Removing the Battery
In the other hand hold the battery cartridge.
Rotate RF cable upward in order to avoid
Hold the Naída CI in one hand.
bumping it upon battery removal.
1
7