Weblink; Using Weblink - Pioneer AVH-Z7250BT Manual De Instrucciones

WebLink™

WebLink lets you enjoy compatible smartphones apps in the car. You can operate
WebLink compatible applications with finger gestures such as tapping, dragging,
scrolling, or flicking on the screen of this product.
NOTES
• The supported finger gestures may vary depending on the WebLink compatible application.
• To use WebLink, you must first install the WebLink Host app on the iPhone or smartphone. For details
about the WebLink Host app, visit the following site: https://www.abaltatech.com/weblink/
• Be sure to read Using app-based connected content (page 63) before you perform this operation.
• Copyright protected files such as DRM cannot be played.
WARNING
Certain uses of the iPhone or smartphone may not be legal while driving in your jurisdiction, so you
must be aware of and obey any such restrictions. If in doubt as to a particular function, only perform it
while the car is parked. No feature should be used unless it is safe to do so under the driving conditions
you are experiencing.

Using WebLink

Important
• Pioneer is not liable for any issues that may arise from incorrect or flawed app-based content.
• The content and functionality of the supported applications are the responsibility of the App
providers.
• In WebLink, functionality through the product is limited while driving, with available functions
determined by the App providers.
• Availability of WebLink functionality is determined by the App provider, and not determined by
Pioneer.
• WebLink allows access to applications other than those listed that are subject to limitations while
driving.
Starting procedure
When connecting an iPhone or a smartphone to this product, the settings are
automatically configured according to the device to be connected.
TIPS
• Touch the desired application icon after the WebLink app is launched.
• If you connect your device to this product while a WebLink compatible application is already running,
the application operation screen will appear on this product.
• The desired application is launched, and the application operation screen appears.
• Press to go back to the top menu screen.
WebLink
Displays the main menu of the WebLink source screen.
TIP
When the rear display is connected to this unit, video from the WebLink screen can be displayed to the
rear display except while the AV source with video content is active even while driving.
For iPhone users
System requirement
iOS 10.0 or higher (up to iOS 11.x)
NOTE
iPhone 4s is not available on the WebLink.
1
Unlock your iPhone and connect it to this product via USB.
Refer to iPod/iPhone with Lightning connector (page 52).
2
Press .
3
Touch .
4
Touch [WebLink].
5
Touch desired icon in the tab.
The WebLink app is launched.
For smartphone (Android™) users
System requirement
Android 5.0 or higher (up to Android 8.x)
NOTES
• [USB MTP] is set to [Off] to use WebLink (page 38).
• The video playback capability depends on the connected Android device.
1
Unlock your smartphone and connect it to this product via USB.
29
En