Weblink; Using Weblink; Starting Procedure - Pioneer AVH-Z9250BT Manual De Instrucciones

WebLink™

WebLink lets you enjoy compatible smartphones apps in the car. You can operate
WebLink compatible applications with finger gestures such as tapping, dragging,
scrolling, or flicking on the screen of this product.
NOTES
• The supported finger gestures may vary depending on the WebLink compatible application.
• To use WebLink, you must first install the WebLink Host app on the iPhone or smartphone. For details
about the WebLink Host app, visit the following site: https://www.abaltatech.com/weblink/
• Be sure to read Using app-based connected content (page 69) before you perform this operation.
• Copyright protected files such as DRM cannot be played.
WARNING
Certain uses of the iPhone or smartphone may not be legal while driving in your jurisdiction, so you
must be aware of and obey any such restrictions. If in doubt as to a particular function, only perform it
while the car is parked. No feature should be used unless it is safe to do so under the driving conditions
you are experiencing.

Using WebLink

Important
• Pioneer is not liable for any issues that may arise from incorrect or flawed app-based content.
• The content and functionality of the supported applications are the responsibility of the App
providers.
• In WebLink, functionality through the product is limited while driving, with available functions
determined by the App providers.
• Availability of WebLink functionality is determined by the App provider, and not determined by
Pioneer.
• WebLink allows access to applications other than those listed that are subject to limitations while
driving.

Starting procedure

When connecting an iPhone or a smartphone to this product, settings are required
according to the connected device. For details, refer to Setup for iPod/iPhone or
smartphone (page 19).
TIPS
• Touch the desired application icon after the WebLink Host app is launched.
• The desired application is launched, and the application operation screen appears.
• Press to go back to the top menu screen.
WebLink
Displays the main menu of the WebLink source screen.
For iPhone users
1
Connect your iPhone to this product via USB.
Refer to Connecting via the USB port (page 56).
2
Press .
3
Touch .
4
Touch [WebLink].
5
Touch desired icon in the tab.
The WebLink app is launched.
For smartphone (Android) users
NOTE
The video playback capability depends on the connected Android device.
1
Unlock your smartphone and connect it to this product via USB.
Refer to Connecting via the USB port (page 57).
2
Press .
3
Touch .
4
Touch [WebLink].
5
Touch desired icon in the tab.
The WebLink app is launched.
31
En