Relative Mode - Beta 1760/OHM Manual Del Usuario Y Operador

relatiVe mode

The relative measurement feature allows you to make measurements relative to a stored refe-
rence value. A reference voltage, current, etc. can be stored and measurements will be made in
comparison to that value. The displayed value is the difference between the reference value and
the measured value.
Note: Relative mode is inactive in 4-20mA function.
1 Perform the measurement as described in the operating instructions.
Press the rel button to store the value read on the display and the "rel" indicator will
2
appear on the display.
3 LH auxiliary display shows the margin of initial value and the current value. RH auxiliary
display shows the initial reading. Main display shows the reading after REL TEST.
Press the eXit button to exit the relative mode.
4
80