Safety Instruction - Beta 1760/OHM Manual Del Usuario Y Operador

saFetY instructions
This meter has been designed for safe use, but must be operated with caution. The rules listed
below must be carefully followed for safe operation.
1 NEVER apply voltage or current to the meter that exceeds the specified maximum values:
Input Protection Limits
Function
V DC or V AC
mA AC/DC
A AC/DC
Frequency, Resistance, Capacitance,
Duty Cycle, Diode Test, Continuity
Temperature
Surge Protection: 8kV peak per IEC 61010
2 USE EXTREME CAUTION when working with high voltages.
3 DO NOT measure voltage if the voltage on the "COM" input jack exceeds 1000V above
earth ground.
Maximum Input
1000VDC/AC rms
500mA 1000V fast acting fuse
10A 1000V fast acting fuse (20A for 30 seconds max every 15
minutes)
1000VDC/AC rms
1000VDC/AC rms
57