Maintenance - Beta 1760/OHM Manual Del Usuario Y Operador

maintenance

WarninG: To avoid electric shock, disconnect the test leads from any source of voltage before
removing the back cover or the battery or fuse covers.
WarninG: To avoid electric shock, do not operate your meter until the battery and fuse covers
are in place and fastened securely
This MultiMeter is designed to provide years of reliable service, if the following instructions are
complied with:
1 keeP tHe meter drY. If it gets wet, wipe it off.
2 use and store tHe meter in normal temPeratures. Extreme temperatures
can shorten the life of the electronic parts and distort or melt plastic parts.
3 Handle tHe meter GentlY and careFullY. Dropping it can damage the
electronic parts or the case.
4 keeP tHe meter clean. Wipe the case with a damp cloth from time to time. DO NOT
use chemicals, cleaning solvents, or detergents.
5 use onlY FresH batteries oF tHe recommended size and tYPe. Remove
old or weak batteries so they do not leak and damage the unit.
6 iF tHe meter is to be stored For a lonG Period oF time, the batteries
should be removed to prevent damage to the unit.
86