Continuity Check - Beta 1760/OHM Manual Del Usuario Y Operador

continuitY cHeck

WARNING: To avoid electric shock, never measure continuity on powered circuits or wires.
1 Set the function switch to the Ω CAP
Insert the black lead banana plug into the negative com jack. Insert the
2
red test lead banana plug into the positive
3 Press the mode button to indicate "
4 Touch the test probe tips to the circuit or wire you wish to check.
5 If the resistance is less than approximately 35W, the buzzer will sound.
If the circuit is open, the display will indicate "ol".
position.
jack.
" and "Ω" on the display
69