Early Reflections (Er); User Er Parameter - Yamaha ProR3 Manual Del Propietário

Early Reflections (ER)
Key Parameter
MAIN
ER Type
IniDelay
Liveness
RoomSize
Diffusion
FINE
ER Number
FeedBack Delay
FeedBack Gain
FeedBack High
Density
HPF
LPF
Space Mod
Common parameters
*1 Small Hall, Large Hall, Random, Reverse, Plate, Spring, User A, User B, User C, User D

User ER parameter

There are four User ER banks; A–D.
For each bank, you can specify 40 reflections.
For each reflection, you can specify the delay time, level, and panning.
Key Parameter
FINE
A-01 Delay
A-01 Level
A-01 Pan
•
•
•
D-40 Pan
Return to the beginning of FINE (ER Number)
Value
*1 Type of early reflection simulation
0.1 ~ 200.0 ms Delay time until early reflections are heard
0 ~ 10 Decay characteristics of the early reflections; 0: dead, 10: live
0.1 ~ 25.0 Spacing of reflections
0 ~ 10 Spread of the early reflections
1 ~ 40 Number of early reflections
0.1 ~ 1000.0 ms Delay time of feedback
–99 ~ +99% Amount of feedback; "-" inverts the phase
0.1 ~ 1.0 Amount of high range feedback; relative to FeedBack Gain
0 ~ 100 Density of reflections
Thru, 40 Hz ~ 1.0 kHz Cutoff frequency of high pass filter
400 Hz ~ 20 kHz, Thru Cutoff frequency of low pass filter
0 ~ 10 Modulation level
Refer to "Common parameters" on page 27
Value
0.1 ~ 1000.0 ms Delay time of first reflection of bank A
–100 ~ +100% Level of first reflection of bank A
L16 ~ R16 Pan position of first reflection of bank A
Advanced uses (2) – Editing functions –
Description
Description
ProR3 Digital Reverberator
19