Front Panel; Status Indicators - Yamaha ProR3 Manual Del Propietário

2

Front panel

Front panel
1 2 3
DIGITAL REVERBERATOR
L R
CLIP STEREO
L
-3
MONO
-6 R
-9
-12 PRESET
-18 USER
-24
PROGRAM
MIDI
-36
INPUT
0
FREQ GAIN
100
300 800
50 700 -15 +15 350
-00 +10
L R
LOW
0 A
1 INPUT level meters (L/R)
This is a stereo LED meter with 8 segments for each channel. The segments respectively indicate
levels of –36 dB, –24 dB, –18 dB, –12 dB, –9 dB, –6 dB, –3 dB, and CLIP.
Note: The level meters are located in the circuitry after the A/D converter. This means that the CLIP
indicator will indicate clipping of the digital signal. Adjust the input level so that the CLIP indicator
does not light.
2 PROGRAM number display
This is a two-digit seven-segment display that indicates the currently selected program number.
If this display is blinking, a new program has been selected but its contents have not yet been
recalled.
3

Status indicators

These are six LEDs which indicate program status and other functions of the ProR3.
STEREO, L/R MONO
The input mode of the currently selected program is shown by three indicators. The ProR3 has
four input modes (Stereo, LR/Mix, R-Mono, L-Mono), selected by the UTILITY key. When both
L/R Mono indicators are lit, LR/Mix mode is selected.
PRESET/USER
These indicators show the program status. Use the PROGRAM key to select the status. When the
PRESET indicator is lit, preset programs are selected. When the USER indicator is lit, user pro-
grams are selected.
MIDI
This indicator will light while MIDI data is being received from an external device connected to
the MIDI IN connector.
4 LCD
This backlit LCD shows the name of the selected program and the program parameter values.
Messages related to operation will also appear here.
ProR3 Digital Reverberator
4 5
PRE EFFECT EQ
FREQ GAIN FREQ GAIN
ON
4k 10k
2k
2k 20k
5k -15 +15 -15 +15
HIGH
MID
6
DATA/CURSOR PARAMETER
FINE
MAIN
INC
EQ EQ ON
DEC
GATE GATE ON
LEVEL/
COMPARE OTHERS
BAL
B
7 8
7 8 9
PROGRAM INFINITE
4 5 6
STORE
1 2 3 UTILITY
CANCEL
RECALL/
–
0
• BYPASS
ENTER
C D
9
POWER
ON/ OFF