Working On Pre-Assembled Wooden Workpieces (Fig. G); Cleaning - Parkside PSVH 56 A1 Instrucciones De Uso

Working on pre-assembled wooden workpieces
(Fig. G)
♦ Set the drilling depth (see figures A to C).
♦ Push the limit stop on the drilling jig
♦ Fix the drilling jig
the clamp
♦ Select the appropriate woodscrews
NOTE
► The woodscrews
of the inserted limit stop (5 mm) must be added to the length.
♦ Screw the selected woodscrews
after drilling.
♦ Fill the drill holes with glue and push the screw head covers
the holes.

Cleaning

WARNING
► Before cleaning, always remove the step drill
ment from the drill or cordless screwdriver.
► Do not use aggressive or abrasive cleaning agents, as these can
damage the surfaces of the product.
♦ Use a soft, dry brush to remove drilling dust from the product.
♦ You can also clean the product using a dry cloth.
│ GB │ MT
■ 28
and the wooden workpiece firmly in place with
.
selected must be 5 mm longer since the width
upwards.
with the help of the table.
in using the bit attachment
or the bit attach-
into
PSVH 56 A1