Bosch BSG8 Serie Instrucciones De Uso página 33

Changing the filter
Cleaning the motor protection filter
The motor protection filter should be cleaned at
regular intervals by tapping it or washing it out.
Open the dust compartment cover.
Remove the motor protection filter in the direction of
the arrow.
Empty the motor protection filter by tapping it.
If the motor protection filter is very dirty, wash it out.
Leave the filter to dry for at least 24 hours.
After cleaning, insert the motor protection filter into
the appliance as far as it will go and close the dust
bag compartment lid.
Replacing the micro-hygiene filter
(Depending on equipment level)
You should you change the micro-hygiene filter with
each new replacement filter pack
(at least after every five dust bags).
Press the exhaust grille latch in the direction of the
arrow to unlatch the exhaust grille and open it.
Press the filter frame latch in the direction of the arrow
to unlatch the filter frame and remove it.
en
33