Working Range; Standard Accessories; Optional Accessories Supplied On Request; General Conditions Of Use - Corghi ProLine 650 Manual De Uso

• height with guard open ........... 1625 mm
• height without guard ...............1213 mm

Working range

• settable rim width ........ from 1.5" to 20"
• rim diameter measurable with the sen-
sor (version with automatic sensor) ..
.........................................from 10" to 26"
• settable rim diameter ..... from 1" to 35"
• max. wheel/machine distance (version
with manual sensor)....................250 mm
• max. wheel/machine distance (version
with automatic sensor).............270 mm
• max. wheel width (with guard) .. 600 mm
- Max. wheel weight ........................... 70 kg
- Machine weight with guard (without ac-
cessories) ........................................... 96 kg
- Machine weight without guard (without
accessories) ...................................... 84 kg
- Noise level in operation .......... < 70 db(A)
STANDARD
ACCESSORIES
The following parts are supplied together
with the machine.
- Calliper for wheel width measurement
- 10 mm hex wrench
- 100 g weight
- Power cable
- Weight pliers
- Threaded hub
- 10 mm hex-headed wrench
- small cone
- medium cone
- large cone
- small wheel fastener cap guard
- spacer cap
- small wheel fastener cap
- wheel fastener quick ring nut
54
OPTIONAL
ACCESSORIES
SUPPLIED ON
REQUEST
Please refer to the relevant accessories
catalogue.
GENERAL
CONDITIONS OF
USE
The equipment is intended for professional
use only.
WARNING
Only one operator may work on the equip-
ment at a time.
The wheel balancers described in this
manual must be used exclusively to meas-
ure the extent and position of car wheel
unbalances, within the limits specified in
the Technical specification section. Fur-
thermore, models equipped with motors
must be provided with a suitable guard,
fitted with a safety device, which must be
lowered during the spin operation.
WARNING
Any use other than those described in this
manual is to be considered improper and
unreasonable.
WARNING
Do not start the machine without the wheel
locking equipment.
WARNING
Do not use the machine without the guard
and do not tamper with the safety device.
User manual ProLine 650