Main Features - Corghi ProLine 650 Manual De Uso

WARNING
During work and maintenance opera-
tions, always tie back long hair and do
not wear loose clothing, ties, necklaces,
wristwatches or any other items that may
get caught up in the moving parts.
Key to caution and instruction
labels
Never use the wheel
spin shaft as a lifting
point for the machine.
Unplug the power supply
plug before perform-
ing any maintenance/
repair operations on the
machine.
Do not lift up the guard
when the wheel is turn-
ing.
Please use centring ac-
cessories with hole di-
ameter 40 mm.

MAIN FEATURES

- Adjustable speed from 150 to 220 rpm.
- Automatic sensor for measuring distance
and diameter (version with analogue sen-
sor).
- Automatic sensor for width measurement
(if present).
User manual ProLine 650
- Automatic brake for stopping the wheel
at the end of the spin.
- Wheel-holder shaft locking brake (op-
tional)
- STOP button to stop the machine imme-
diately.
- Side flange holders.
- Top tray to take weights of all types.
- Automatic start when safety guard is
lowered (version with guard).
- Luminous digital display unit double
display and 3D graphics.
- Microprocessor processing unit (32 bit).
- Resolution: 1g (1/10oz).
- Wide selection of programmes making
the machine easy to use.
- Unbalance value display in grams or
ounces.
- Unbalance display rounding-off setting.
- balancing modes available:
• Standard: dynamic balancing (both sides
of rim).
• Alu / Alu p: seven different programmes
for alloy rims.
• Motorcycle dynamic: dynamic balancing
on both sides of conventional motor
cycle wheels.
• Motorcycle ALU: dynamic balancing on
both sides of alloy motor cycle rims.
• Static: on one plane only.
- "Shift planes" programme (in Alu P) for
using multiple five gram weights, i.e.:
available without the need for partial cuts.
- "Hidden Weight" programme (in Alu P) in
order to divide the outer side balancing
adhesive weights into two equal weights
positioned behind the spokes of the rim.
- "Split Weight" programme (motorcycle
programmes) to divide the weight into
two equivalent values to be placed on
either side of the spoke.
- "OPT flash" programme for rapid optimi-
sation of operating noise reduction.
- General utility programmes:
• calibration
• service
• diagnostics.
UK
51