English
an electrician if there are any questions or
problems.
‧ In the event of water leakage or when the
residual current protection device is triggered,
immediately disconnect all devices in the
aquarium from the power supply.
‧ If they are not being used, always disconnect
all devices in the aquarium from the power
supply before you install/remove any parts
and before all cleaning and maintenance
work.
‧ Protect the mains socket and mains plug
against moisture. It is recommended to form a
drip loop with the mains cable to prevent any
water running along the cable to the mains
socket.
‧ The electrical data of the appliance must
match the data of the power mains. This data
is found on the type plate, the packaging and
in these instructions.
18