Omnitronic DMS-1150 Manual Del Usuario página 31

USING TEMPORARY SAMPLES
The temporary samples on the Bank-buttons remain in the buffer memory if you change the CD without
switching the CD-player off. Please note that these samples are only temporarily available and cannot be
memorized on the new CD. This means, that such temporary samples will be deleted from the buffer
memory when you will switch off the CD-player. However, the original samples can be recalled from the
respective CD using the Recall-function.
6.11 Effects
(1) The different effects can be activated via the respective Effect-button. If the effect is activated, the
respective LED is on.
(2) The effect-parameters can be adjusted via the Parameter Time-control and the Parameter Ratio-control.
Press the Hold-button (LED on) in order to hold the parameter-adjustments. Otherwise the adjustments
are only temporary and the CD-player returns to the memorized settings. If you wish to memorize these
settings press the Memory-button (LED on) and hold it for one second. In this way, the adjusted
parameters can be recalled via the Recall-function.
(3) You can recall all memorized effect-parameters from up to 500 CDs after switching the CD-player off.
Therefore, you have to switch the CD-player on, press the Memory-button (LED on) and insert the
respective CD. The display shows "Recall" until the loading process is finished.
Scratch-function
The scratch-function resembles the scratching with a turntable. By turning the Scratch-wheel forwards and
backwards, different scratching-effects can be produced. If you turn the Scratch-wheel continuously
forwards, the playback resembles the playback-speed via the Play/Pause-button.
Skid-effect
When choosing the Skid-effect, the original sound is modified in accordance with the Parameter-control.
The Skid-time (PT) can be adjusted between 0 and 9990. The Skid-rate (PR) can be adjusted between 0 and
9990.
Filter-effect
When choosing the Filter-effect, the original sound is modified in accordance with the Parameter-control.
The Filter-rate (PR) can be adjusted between 0 and 255.
Phase-effect
When choosing the Phase-effect, the original sound is modified in accordance with the Parameter-control.
The Phase-time (PT) can be adjusted between 0 and 9990. The Phase-rate (PR) can be adjusted between 0
and 255.
Echo-effect
When choosing the Echo-effect, an echo is added to the original sound. The Echo-time (PT) modifies the
repeating frequency and size of the echo and can be adjusted between 0 and 2000 ms.
The Echo-rate (PR) modifies the feedback of the echo-effect and can be adjusted between 0 and 255.
Flanger-effect
When choosing the Flanger-effect, the effect of a jet engine is added to the original sound. The Flanger-time
(PT) modifies the sound of the flanger-effect and can be adjusted between 0 and 9990 ms.
The Flanger-rate (PR) modifies the depth of the flanger-effect and can be adjusted between 0 and 255.
Trans-effect
When choosing the Trans-effect, the original sound is modified in accordance with the Parameter-control.
The Trans-time (PT) can be adjusted between 0 and 9990. The Trans-rate (PR) can be adjusted between 0
and 255.
Pan-effect
When choosing the Pan-effect, the sound is cyclically directed to the left and right side. The Pan-time (PT)
modifies the changing speed and can be adjusted between 0 and 9990 ms.
Reverse-function
The unlimited reverse play can be activated via the Reverse-function. The playback-direction can be
changed as often as you like by pressing the Reverse-button. The Reverse-time (PT) modifies the playback-
speed and can be adjusted between -1000 and 1000 as pitch change from -100 % to +100 %.
31/64 10602426_V_1_0.DOC