Specified Conditions Of Use - Kemper SmartMaster Manual De Uso

3.1 Specified Conditions of Use

The Smart Master is designed to extract welding fumes arising during electrowelding
right at their source and to filter them out.
Hazardous materials released during the work process are captured by the exhaust
hood. Along with the exhaust air, they flow into the filter unit. Here they are passed
through a prefilter for coarse particles, another pre-filter for fine dust and a main filter,
in which the fine, breathable smoke particles are separated with an efficiency of more
than 99%. The cleaned air is sucked in by the fan and is returned to the work area.
In the case of extracting welding fumes containing carcinogenic levels such as
are created when welding alloy steels (eg: stainless steel), according to official
regulations, only devices tested and approved for the so-called recirculated air
method may be used.
This filter unit is approved for extracting welding fumes emitted during welding
of steels with an alloy content of <5% to >30% and complies with the
requirements for the welding fume separation class W3, according to DIN EN
ISO 15012-1.
In Germany for welding jobs, the provisions of Technical Rule 528 "Welding
Work" (Technical Rules for Hazardous Substances) are generally to be
complied with. When extracting welding fumes with carcinogenic constituents
(eg: chromates, nickel oxides, etc.), in addition the requirements of Technical
Rule 560 are to be complied with.
You will find the dimensions and further details on the SmartMaster which must be
observed in the Section on Technical Data.
NOTE
Observe the information in Section 9.1 on Technical Data.
It is essential to observe these specifications.
Specified Conditions of Use also include complying with
the notes
− on safety,
− on operation and control,
− on maintenance and servicing,
described in this manual.
Any other or further use is considered to be improper use.
Responsibility for any resulting damage rests solely with the end-user
of the SmartMaster. This also applies to unauthorized modifications to
the SmartMaster.
Art. No.: 150 2220
Technical changes and errors excepted.
KEMPER SmartMaster Operating Instructions - EN
- 41 - Rev.: 7
Latest update:
02/2015