Residual Risk - Kemper SmartMaster Manual De Uso

3.4 Residual Risk

Even when all safety rules are observed, during the operation
of the SmartMaster there remains a residual risk as described below.
All persons working on and with the Smart Master must know what this residual risk
is and follow the instructions that prevent these residual risks leading to accidents or
damage.
WARNING
Serious injury to the lungs and the respiratory tract is possible -
wear breathing protection, e.g.:
KEMPER autoflow XP or a protective dust filter mask
belonging to Class FFP2 as per EN 149.
Skin contact with welding fumes, etc. can cause skin irritation in
sensitive individuals - wear protective clothing.
Before starting welding work, ensure that the exhaust arm and the
exhaust hood are positioned correctly, the filter elements are
complete and undamaged, and the device is running! Only when
the green indicator lamp is lit is there sufficient volumetric flow
for welding fumes to be extracted.
When changing the filter cartridges, there may be skin contact
with the separated dust and also some of the dust may be stirred
up by the work. Therefore, wear breathing protection and
protective clothing.
Embers in the filter elements may possibly lead to a smouldering
fire - switch off the filter unit, close the damper in the exhaust
hood and let the device cool down in a controlled manner.
Art. No.: 150 2220
Technical changes and errors excepted.
KEMPER SmartMaster Operating Instructions - EN
- 44 - Rev.: 7
Latest update:
02/2015