System Settings - Roadstar HRA-600D+ Manual De Instrucciones

3 English
INFO
When the radio station is playing, press the [Info] button (7) repeatedly to cycle
through the information broadcasted by the radio as follow:
UNDER DAB

DLS (Dynamic Label Segmenting): Radio text broadcasted from the DAB station
such as the news, songs being played...etc.

PTY (Programme Type): shows which type of programme you are listening to,
"Music", "Talk", "News" etc. If there is no information, it will display "Programme
Type".
 Channel/Frequency: The frequency of DAB is displayed such as "11C
220.352MHz".
 Audio info: The display shows the digital audio bit rate of the current reception.
 Signal error: The signal strength is displayed graphically.
 Time/Date: The time and date are set automatically.
 Software version
UNDER FM

RT (Radio text): Text broadcasted from the FM station

Signal error: The signal strength is displayed graphically.

Time/Date: The time and date are set automatically.

Frequency: the FM frequency for the radio station in playing.

Auto / Stereo: Automatic switching between mono and stereo reception.
Note: Time and date accuracy depends on the info broadcasted from the radio
station.
NAVIGATE INTO THE MENU
In FM / DAB mode there is an option menu.
1. Press and hold [Menu] (7) to access to the options.
2. Press the [Tuning -/+] buttons (4/5) to navigate into the options.
3. Press [Enter] (8) to select the options.
4. Press [Menu] (7) to exit the menu.

SYSTEM SETTINGS

In FM / DAB mode, press and hold [Menu] (7) and use [Tuning -/+] (4/5) to select
"System";
Time: To set the desired time option:

Set Time/Date;

Auto Update;

Set 12 / 24 Hours;

Set Date Format.

Backlight.

Factory Reset.

SW version: select this oprion to see the current software version.

Sleep Timer.
