Factory Reset - Roadstar HRA-600D+ Manual De Instrucciones

5 English
12. Confirm with the [Enter] button (8);
13. Press the [Tuning -/+] buttons (4/5) to adjust the volume;
14. Confirm with the [Enter] button (8);
15. Press the [Tuning -/+] buttons (4/5) to select "Alarm ON" or "Alarm OFF";
16. Confirm with the [Enter] button (8).
Note: To set the second Alarm, repeat all the steps with " Alarm 2" instead of
"Alarm 1".
ACTIVATE / DEACTIVATE ALARM SETTINGS:
In stand-by mode, press repeatedly the [Alarm] button (6) to select "Alarm ON" or
"Alarm OFF".
ALARM OFF:
During Alarm on, press [Alarm] button (6) to deactivate the alarm sound (the Alarm
setting remains) or press [Snooze] button (3) to postpone the alarm for 5 minutes.

FACTORY RESET

When the radio is ON:
1. Press and hold [Menu] (7) to access to the menu;
2. Press the [Tuning -/+] buttons (4/5) to navigate into the options and select
"System";
3. Confirm with the [Enter] button (8);
4. Press the [Tuning -/+] buttons (4/5) to select "Factory Reset";
5. Confirm with the [Enter] button (8);
6. Press the [Tuning -/+] buttons (4/5) to select "yes";
7. Confirm with the [Enter] button (8).