ABB M22341 Manual Del Usuario página 8

ABB-Welcome
6B In standby mode, hold this button for 3 seconds to send SOS alarm to
6C *Programmable button for additional functions, e.g. call to guard unit,
7 System setting button
Enter the system setting menu for various functions of the device.
If the LED flashes rapidly, it means that setting is busy.
8 **Induction loop function
* For use of those buttons, please contact your electrical installer.
** The function is only available in M22343-.
Induction loop function
This function is available for hearing-impaired persons wearing a hearing aid to hear the
person speaking from the outdoor station or from other indoor stations during an intercom call.
The device is able to interface hearing aids with "T" function at a distance of around 35 cm.
Pos : 22 /Busc h-J aeg er (Neustr uktur)/Modul- Struktur /Online-Dokumentati on/Steuermodul e - Onli ne-D okumentation (--> F ü r all e D okumente <--)/++++++++++++ Seitenumbruc h ++++++++++++ @ 9\mod_1268898668093_0.doc x @ 52149 @ @ 1
|
(default function).
the guard unit. If LED flashes slowy, it means success; and if flashes
rapidly, it means failure.
intercom.....
max 35 cm
— 7 —