MESTO 3552A Instrucciones De Uso página 17

EN
Function:
2. Activate the pump lever [11].
+
Have damaged parts or parts that do not work properly repaired immediately by our
customer service department or by service partners authorized by us.
Preparation
Observe the instructions in the section entitled „Safety".
The device must be in an upright position.
into the tank.
+
+
3. Screw the cover [19] onto the tank.
Spraying
Observe the instructions in the section entitled "Safety".
Operate the device only while it is vertical or suspended upright and nearly vertical.
Avoid allowing drops of spray to drift onto areas that are not being treated.
Observe the instructions of the spray product manufacturer!
1. Place the device on its back.
pressure.
+
+
3. Ensure that the optimum spraying pressure is set on the pressure gauge [22]
.
Nozzle
Pressure
2.0 bar (29.0 psi)
6.0 bar (87.0 psi)
1.1 (Basic equipment)
0.56
0.96
17
ENGLISH
80015
0.48
0.85
8002
0.65
1.13