Rockwell Automation Allen-Bradley PowerFlex 40P Serie Guia De Inicio Rapido página 17

Display/Fault Reset
RUN
REV
FAULT
No. LED
Run Status
Direction Status Steady Red
Fault Status
No. Key
Drive Programming Tools
For additional drive programming and control, a DSI remote HIM or PC
programming tools (DriveExplorer™ or DriveTools™ SP) should be used.
Description
Serial Converter Module
DriveExplorer Software
DriveTools SP Software
Remote Panel Mount, LCD Display
Remote Handheld, LCD Display
(1)
Requires a Serial Converter Module.
Set Parameter Display Option
E201 [LED Display Opt]
Selects which parameters can be viewed by the drive's LED interface.
E201 Option Parameter Set
0 All Basic Display (Group b) and Advanced Display (Group d) parameters
1 All Basic Display Group (b001-b029) parameters
2 Basic Display Group parameters b001-b007 and b010
3 Basic Display Group parameter b001-b004
Default:
Values
Min/Max:
Display:
LED State Description
Steady Red Indicates drive is running.
Flashing Red Drive has been commanded to change direction.
Indicates drive is running in reverse direction.
Flashing Red Drive has been commanded to change direction and motor is
decelerating to zero.
Flashing Red Indicates drive is faulted.
Name Description
Up Arrow Scroll: Press and release to scroll through user-selectable
Display Group and parameters.
Reset: Press and hold for three seconds to clear active fault.
(1)
(1)
2
0/3
1
Menu Description
Basic Display Group (View Only)
Commonly viewed drive operating
conditions.
Advanced Display Group (View Only)
Consists of advanced drive operating
conditions.
Fault Designator
Consists of list of codes for specific fault
conditions. Displayed only when fault is
present.
Catalog Number
22-SCM-232
9306-4EXP02ENE
9303-4DTS01ENE
22-HIM-C2S
22-HIM-A3
English-15