Chapter 4 - Using Your Tv; Accessing Channels; Watching Connected Devices; Volume - JVC LT-32HA48U Manual De Usuario

Chapter 4 & 5
• Press OK to skip the country selection and
enter the next step. Or use ◄/► to reselect
your country, then press OK to enter.
• Select Digital & Analogue, Digital or
Analogue, then press OK/► to start the
automatic search, which relates to all DVB-T
digital and/or analogue channels.
- Select Cable.
• Press ▲/▼ to select Channel install, and
press OK/► to enter.
• Select Automatic search, then press OK/► to
display Automatic search.
• Press OK to skip the country selection and
enter the next step. Or use ◄/► to reselect
your country, then press OK to enter.
- Select Digital & Analogue, then press OK/►
to enter. Select your scan mode if available
and configure proper cable information in the
same way as in Initial setup. Select Scan and
press OK/► to start your automatic search
relating to all DVB-C digital and analogue
channels.
- Select Digital, then follow the same process
as above to start your automatic search
relating to all DVB-C digital channels.
- Select Analogue, then press OK/► to start
your automatic search relating to all analogue
channels.
4. The search may take a few minutes. During the
process, you can press Menu to abort halfway.
5. Once the automatic search ends, press Menu to
return to the previous step or press OK to restart
your channel search.
6. After the automatic search, channels are arranged
in a preset order. You can skip channels, modify
the preset order or rename channels.

Chapter 4 - Using your TV

Using your TV

Accessing channels

Using the numeric buttons: press the corresponding
numeric buttons to access the channels.
Using the PR+/- or P+/- buttons: scroll through the
channels.

Watching connected devices

There are three ways for you to select connected
devices on your TV: you can press Menu on the
remote control and select Source, use OK button
to enter, then press ▲/▼ and OK to select your
wanted connected device. You can also repeatedly
press Source on the remote control or OK on the TV
set to toggle between TV and other input sources.
To resume TV viewing, press any numeric button to
enter the channel, while P+/- will cycle through all TV
channels and other input sources.
Note: Not all models have OK button on the set.
Using your TV & Using more of your TV

Volume

Volume control: use the VOL+/- buttons on the TV set
or V+/- buttons on the remote control to increase or
decrease the volume.
Sound mute: press the Mute button to temporarily
mute the sound. Press this button again or the V+
button to restore it.

Using TV menus

1. Press Menu to display the main menu.
Picture Sound
Source Media
2. Press ▲/▼/◄/► to select the desired item, then
press OK to open the corresponding submenu.
3. In submenus, use ▲/▼ to select menu options,
use ◄/► to set functions or change values. Use
OK to activate a setting. Use OK/► to open the
corresponding submenu.
4. Press Menu to return to the previous menu.
5. Press Exit to close the menu.
Note: Some options may not be available for
certain signal sources.

Selecting menu language

You can choose your preferred menu language
following the instructions below.
1. Press Menu to display the main menu.
2. Press ▲/▼/◄/► to select Setup, then press OK
to enter.
3. Select Language and press OK/► to enter.
4. Select Menu language and press ◄/► to select
your desired language to display the menus.
5. Press Exit to close the menu.

Chapter 5 - Using more of your TV

Using more of your TV

Setting up your favourite channels

You can create a list of your favourite TV channels.
1. Press LIST.
2. Press the yellow button to enter Channel list
selection. Press ▲/▼ to select the favourite list
and press OK to enter.
3. Press the blue button to start editing your favourite
list. Press ▲/▼ to scroll through the channel list
and press OK to select or deselect it.
4. Repeat this procedure to setup other favourite
channels.
EN 9
Timer Options
Lock Setup