T-Link; Enabling Or Disabling T-Link; Using One-Touch Play; Using System Standby - JVC LT-32HA48U Manual De Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 46

T-Link

Use this function to search for CEC devices connected
to the HDMI sockets in your TV and enable one-touch
play and one-touch standby between CEC devices.

Enabling or disabling T-Link

1. Press Menu on the remote control, then select
Options > T-Link.
2. Press ◄/► to select On or Off, if this function
is turned on, T-Link option will be available in
the Quick access menu which you can enter by
pressing the Option button on the remote control.

Using one-touch play

With one-touch play, pressing the play button on (for
example) your DVD remote control starts playback on
your DVD device and automatically switches your TV
to the correct source, displaying DVD content.

Using system standby

With system standby, pressing the
example) your TV remote control switches your TV
and all connected HDMI devices to standby mode.
Note: Guide Manual will be available in the sublist
of T-Link option when T-Link function is
turned on and CEC devices are connected.
With this function, you can operate a virtual
control by using the TV remote control.

Common interface

Encrypted digital TV channels can be decoded with a
common interface module and a card provided by a
digital TV service operator.
The common interface module may enable several
digital services, depending on the operator and
services you choose (for example, pay TV). Contact
your digital TV service operator for more information
about services and terms.

Using the common interface module

WARNING: Switch off your TV before inserting a
common interface module. Be sure to follow the
instruction described below. Wrong insertion of a
common interface module may damage both the
module and your TV.
1. Following the directions printed on the common
interface module, gently insert the module into the
common interface slot on the TV.
2. Push the module in as far as it will go.
3. Turn on the TV and wait for the common interface
function to be activated. This may take several
minutes.
Note: Do not remove the common interface
module from the slot. Removing the module
will deactivate the digital services.

Accessing common interface services

After inserting and activating the common interface
module, press Menu on the remote control and select
Options > Common interface.
This menu option is only available if the common
interface module is correctly inserted and activated.
On-screen applications and content are provided by
your digital TV service operator.

Software update

Press Menu on the remote control and select
Options > Software update. Press OK/► to enter.
button on (for
- Current version: Checks the current version of the
software.
- Product name: Displays the product name of your
set.
- Serial number (if available): Displays the serial
number of your set.
- OAD (Over Air Download): Enables you to install
the latest version of the software if available. Select
OAD and press OK/► to enter.
• Use ◄/► to select Yes under Auto download
to automatically download the latest software if
available. After the software has been downloaded
successfully, you will be prompted to decide if you
want to install it right now. If yes, follow the on-
screen instructions to complete your installation.
You can also select to ignore the installation here.
• Select No under Auto download to decline the
automatic download.
• Select Manual OAD download and press OK/►
to start manual scanning the latest software.
Follow the on-screen instructions to complete.
During the scan, press OK/Exit to cancel or exit
the process.

Changing to Shop or Home mode

1. Press Menu on the remote control and select
Options > Location.
2. Press ◄/► to select your location: Shop or
Home.
3. Press Exit to exit.
Note: According to the regulation of European
EN 11
Using more of your TV
Options
Subtitle
SPDIF type
SPDIF delay
T-Link
Common interface
Location
Enter
Decoding page language
Select
Digital teletext language
Back
Software update
Exit
Ethernet network
Commission 2009/125/EC, in Home mode, TV
will be put into standby mode automatically if
PCM
40
On
Home
West EUR
English

Hide quick links:

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Lt-39hg48u

Tabla de contenido