Lateral Adjustment Of The; Handlebar - Stihl MH 700 Manual De Instrucciones

Actuating the self-propulsion lever:
● 1 Press release lever (1) to the stop
and hold.
● 2 Press self-propulsion lever (2)
quickly to the stop and hold.
● Release release lever (1).
The drive is engaged and the drive
shaft rotates.
● 3 Disengage the drive:
Release self-propulsion lever (2).
8.5 Reverse drive lever
The reverse drive is engaged or
disengaged by actuating the reverse drive
lever when the engine is running.
0478 404 9603 A - EN
The drive lever is mechanically locked for
safety reasons. This prevents inadvertent
actuation. ( 10.2)
The self-propulsion lever must be actuated
in addition to the reverse drive lever to
start the tiller moving. ( 8.4)
Avoid damage to the machine!
Actuate the drive lever quickly and
promptly. Do not dwell in the half-
pressed position.
Actuating the reverse drive lever:
● 1 Press release lever (1) to the stop
and hold.
● 2 Press drive lever (2) quickly to the
stop and hold.
● Release release lever (1).
The reverse drive is engaged.
● 3 Disengage the reverse drive:
Release drive lever (2).
8.6 Lateral adjustment of the handlebar
The handlebar can be adjusted laterally to
three positions.
Adjusting the handlebar:
● Actuate lateral adjustment lever (1).
69