Switching Off Self-Propulsion; Grass Catcher Bag With Anti-Dust; Wheels And Gearbox; Cleaning The Machine - Viking 6360 Serie Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 117
11.7 Switching off self-
propulsion
● Release both self-propulsion
levers (1) to switch off self-propulsion.
11.8 Grass catcher bag with anti-
dust screen
An anti-dust screen (1) is attached
on the upper side of the grass catcher bag,
which prevents fine dust from being blown
upwards in the direction of the user.
Filling:
The centre of the anti-dust screen is lifted
slightly through the air flow which is
generated by the rotary motion of the
mowing blade and is responsible for filling
the grass catcher bag.
When the grass catcher bag is full, this
flow of air is reduced and the anti-dust
screen drops down onto the grass catcher
bag:
Emptying the grass catcher bag:
Risk of injury!
Always disengage the mowing
blade before emptying. (
Take weight into account!
A completely filled grass catcher
bag can weigh up to 22 kg.
Always empty the grass catcher
bag in good time in order to prevent
the discharge chute from becoming
obstructed. Obstructions can block
the mowing blade and lead to
unnecessary wear of the blade
brake clutch.
● Disengage the mowing blade. (
● Detach the grass catcher bag. (
0478 111 9921 A - EN
● The grass catcher bag is easy to empty
thanks to its large aperture, the
swivelling loop handle (2), the
16
handle (3) and the nylon strap (4) sewn
onto the back.
● Attach the grass catcher bag again after
emptying (
17
12. Maintenance
Risk of injury:
Carefully read the section "For your
safety" (
subsection "Maintenance and
repairs" (
safety instructions exactly before
performing any maintenance or
cleaning operations on the
machine.
12.1 Engine
Maintenance interval:
5.6)
See engine instruction manual
To achieve a long service life, it is always
particularly important to maintain a
sufficient level of oil and to change the oil
and air filter regularly, as well as to
observe the recommended oil change
intervals.
Information regarding engine oil and oil
capacity can also be found in the engine
instruction manual.
The cooling ribs must always be kept clean
11.4)
to ensure that the engine is adequately
cooled.
8.7)
8.7) and continue working.
5.), particularly the
5.7), and follow all
Detach the spark plug
socket before performing
any maintenance or
cleaning operations.

12.2 Wheels and gearbox

The wheel bearings are maintenance-free.
The gearbox is maintenance-free.

12.3 Cleaning the machine

Maintenance interval:
After each use
Care of the machine will protect it against
damage and extend its service life.
Never spray water (high-pressure cleaner)
onto engine components, seals, electrical
parts or bearing points. This may result in
damage and expensive repairs.
Do not use aggressive cleaning agents.
These cleaners can damage plastics and
metals, impairing the safe operation of
your VIKING machine.
If you are unable to remove the dirt with
water using a brush or a cloth, VIKING
recommends the use of a special cleaner
(e.g. STIHL special cleaner).
Detach accumulated cutting deposits in
the housing and in the ejection chute
beforehand using a stick.
In particular, also clean the mowing blade.
Cleaning position:
● Empty the fuel tank (e.g. by running
empty).
● Park the machine on level, flat and solid
ground.
● Select the highest cutting level.
(Level 7). (
8.6)
● Fold down the upper handlebar. (
● Remove the grass catcher bag. (
18
8.1)
8.7)
43

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

6375 serieMb 750 ksMb 755 ks

Tabla de contenido