RECORDING
Recording Files
Video Recording
Preparation: Set the power/mode switch to ON.
Slide the power/mode switch to
MODE to select
!
The
8 To stop recording
Press the REC button again.
8 To change the picture quality
Change the settings in [QUALITY].
(
p. 18)
8 To register a fi le to an event
See page 22.
NOTES
•
If the camera is not operated for 5 minutes while the power is on, it turns itself off automatically
to conserve power. To turn the camera on again when using the battery pack, set the power/
mode switch to OFF, then to ON. When using the AC adapter, perform any operation such as
zooming.
•
Video fi les are given the names MOV001.TOD to MOV009.TOD, MOV00A.TOD to
MOV00F.TOD, and MOV010.TOD in order of recording.
•
A new fi le will be created for every 4 GB or approx. 19 minutes of continuous shooting.
•
This camera records video in MPEG2 format compliant with SD-VIDEO format.
•
Do not move or shake the camera suddenly during recording. If you do so, the driving sound
(hum) of the hard disk may be recorded.
20
!
(video) mode.
MODE
The switch returns to
the original position
when it is released.
lamp on the camera lights up.
Press the PLAY/REC button to
select the recording mode.
SELECT
PLAY/REC
The lens cover opens automatically.
Press the REC button to start
recording.
Approximate remaining
time for recording
[ 4 h 5 9 m ]
SP
REC