JVC GZ-HD5 Manual De Instrucciones página 38

Troubleshooting
Trouble
The LCD monitor
appears blank.
The same scene
appears stopped for a
long time.
Video movement
appears jerky.
Images look unnatural
on the TV (long and
thin etc.)
The color of images
looks strange.
High-defi nition
dubbing cannot be
performed to a HDV
device.
When dubbing, the
connected video
device does not
start recording
automatically.
The camera operates
slowly when
switching between
video mode and still
image mode, or when
switching the power
on or off.
The lamp does not
fl ash during battery
charging.
38
(Continued)
•
Operate the camera.
(When using the AC adapter, if the camera is not operated for a
certain length of time it will enter sleep mode, the video/still image
mode lamp lights, and the LCD backlight turns off.)
•
Replace the microSD card.
(If there are scratches etc. on the microSD card, the camera will
have diffi culty reading the data, and this phenomenon may occur.
The camera will try to play back as much as possible, but if this
condition continues, the camera will not be able to play back the
video and it will automatically stop.)
•
Perform cleanup or formatting.
•
Change [VIDEO OUTPUT] in the output setting menu to match
your TV.
•
When recording the white balance was not correctly adjusted.
•
When the video was recorded with x.v.Color
the setting as desired on TV.
•
Check all of the following.
- Record with [QUALITY] in the video menu set to [1440 CBR].
- Create a playlist, then dub the playlist. (Dubbing cannot be done
for each video fi le.)
- When dubbing, set [i.LINK OUTPUT (DUB)] in the output setting
menu to [1440 CBR].
•
Operate the video device manually to start and stop recording.
•
Copy all fi les from the media onto your computer, and erase the
fi les from the media.
(If there are many still images (more than 1,000 fi les) on the
media, it takes time for the camera to process the fi les.)
•
Check the remaining battery charge.
(When the battery is fully charged, the lamp does not fl ash.)
•
When recharging in either a hot or cold environment, ensure that
battery is being charged within the permitted temperature range.
(If the battery is being recharged outside the permitted
temperature range, recharging may stop to protect the battery.)
Action
TM
set to [ON], change