Bluetooth Mode; Starting Bluetooth Mode; Registering Bluetooth Devices; Telephone Mode - Blaupunkt 840 Serie Manual De Instrucciones

Bluetooth mode

The Bluetooth® function allows registering cell phones
and media playback devices with the car sound system.
When you register a cell phone with the car sound sys-
tem, you can make phone calls with the built-in hands-
free function. You can access the lists of dialled numbers
and the phone book of the registered cell phone.
If the connected Bluetooth® device supports the func-
tions A2DP and AVRCP, you can play the music via the
car sound system and control the playback. During a call,
the music playback is interrupted and continued again
after the call.
If a cell phone is registered via Bluetooth® and a call is re-
ceived during the playback of another source, the source
playback is interrupted and the call menu is displayed.

Starting Bluetooth mode

u In the main menu, press on Bluetooth.
- Or -
u Press the
button
requisite: This function is assigned to the button in
the settings menu.)
The Bluetooth® menu is displayed. It contains the list
of known Bluetooth® devices. Other audio sources
are switched off .
[ ] Move selection mark.
[ ] Move selection mark.
[ ] Disconnect connection to marked device.
[ ] Delete marked device from the list.
[ ] Display options menu.
u Tap on the name of the Bluetooth® device with which
you want to establish a connection.
When the device is in range, the connection is estab-
lished and the menu for the device is displayed.
02_NewYork_840_845_gb.indd 39 02_NewYork_840_845_gb.indd 39
2
for approx. 2 seconds. (Pre-

Registering Bluetooth devices

If you want to register a device with the car sound system
for the fi rst time, proceed as follows:
u Ensure that Bluetooth® is activated at the car sound
system and at your Bluetooth® device.
u In the options menu of the Bluetooth® mode, enter a
pairing code (see Bluetooth® settings).
u Search for new devices/connections on your Blue-
tooth® device.
u The car sound system appears as "BP 84x" in the list
of Bluetooth® devices.
u Establish the connection; you may have to enter the
pairing code that was previously entered on the car
sound system.
The connection is being established and the menu
for the registered device is displayed.
Note:
If a telephone is connected with the car sound sys-
tem, the Bluetooth® icon
right edge of the display in all audio/video sources.

Telephone mode

If you connected a phone with the car sound system via
Bluetooth®, the following menu appears.
[ ] Change to next higher level.
[ ] Move selection mark.
[ ] Move selection mark.
[ ] Disconnect connection with current device.
[ ] Display keypad to directly enter a phone
number
[ ] Display options menu.
u Select a contact/number via the call lists or the
phone book and tap on the entry.
The connection is being established.
Bluetooth mode
is displayed at the top
39
03.09.14 15:05 03.09.14 15:05