Setting The Time - BREIL AW00 Manual De Instrucciones

C

SETTING THE TIME

Auxiliary time
1. Pull the crown out to the time correction position when the second hand reaches the 0 second
position.
2. Turn the crown to set the primary time.
3. Press button to set the auxiliary time to the primary time.
• The auxiliary time will be corrected by 1 minute each time button
button continuously will cause the minutes to advance rapidly.
4. Return the crown to the normal position in accordance with a time signal.
• Primary time: Hands move at 1 second intervals.
• Auxiliary time: Hands move at 1 minute intervals.
* The alarm is turned off when the time is set.
When setting the time, the alarm will not sound at the correct time if the auxiliary time
4
is not properly set according to the primary time.
Time correction
position
Crown
Normal position
is pressed. Pressing