Setting The Time; Setting The Date - BREIL OT10 Manual De Instrucciones

C

SETTING THE TIME

Unscrew the crown
1.
➂ will stop at "0".
T urn the crown to adjust the minute hand ➀, hour hand ➁ and 24 hour hand ➃ to
2.
the correct time.
NOTE: The 24 hour hand ➃ is integral with the hour/minute hands ➀/➁
3. Return the crown
The small second hand will start to move.
If the watch is not used for a long period of time, in order to save power, it is
advisable to stop the watch by placing the crown
D

SETTING THE DATE

1. Pull out the crown
Rotate the crown anticlockwise until the required date appears.
2. Do not set the date between 9.00 p.m. and 1.00 a.m. as the automatic date
change mechanism may not work correctly.
Push the crown
3.
6
and pull it out to position (2), the continuous second hand
to its original position (0) (a confirmation beep will be heard).
to position (1)
back to position (0)
in position ➁.