Paper And Plastic Bag; Safe Dust Bag; Replacement Of Dust Bags - Nilfisk VHC110 Manual De Instrucciones

Ocultar thumbs Ver también para VHC110:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

VHC110 - VHC120

Paper and plastic bag

The vacuum cleaner can be equipped with dust collection bag
(*) (Fig. 7).
If the bag is not installed or is installed incorrectly, this could
create health risks for persons exposed.
The Dust Bag requires the use of a specific container
and the cap on the side.

Safe Dust Bag

The vacuum cleaner can be equipped with dust collection bag
(*) (Fig. 8).
If the bag is not properly installed, it could create health risks
for people exposed.
For the codes, see the Recommended Spare Parts table
The Safe Bag requires the use of a specific container
and the cap on the side.
I
GB
E
E
C447
[ NOTE ]
[ NOTE ]

Replacement of dust bags

These operations can only be carried out by
trained and qualified personnel who must wear
adequate clothing, in compliance with the laws in
force.
Take care not to raise dust when this operation is
carried out. Wear a P3 protective mask.
In case of hazardous and/or harmful dust, use
only the bags recommended by the manufacturer
(see "Recommended spare parts").
The bag must only be disposed of by qualified
personnel and in compliance with the laws in
force.
Installing a paper bag not suitable for the class of dust
to be vacuumed, or incorrect installation, can create
a health risk for people exposed.
Replacement of the paper and plastic bag
Release the dust container.
Remove the bag and close it with the relevant cap (1) as
shown in the figure.
Insert a new bag, making sure the bag inlet is sealed.
Place the dust container in the vacuum cleaner.
Use only original Nilfisk bags.
How to replace the Safe Bag
Remove and put the vacuum hose in a safe and dust-
free place.
Close the inlet by using the relevant cap (1).
Release the dust container.
Close the connecting part between the two plastic
openings with a plastic clamp (2).
Remove the relevant connection (3) of the bag from the
inlet.
Fasten the two plastic openings (4).
Close the plastic bag using the relevant band (5).
Insert a new safe bag, making sure the vacuum inlet
is well connected to the bag attachment, to grant the
sealing.
Wrap the plastic bag around the dust container external
wall.
Place the dust container in the vacuum cleaner.
Use only original Nilfisk bags.
10
WARNING!
WARNING!
Figure 7
WARNING!
Figure 8
WARNING!
12/2017

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Vhc120

Tabla de contenido