Vacuum Cleaner Description; Vacuum Cleaner Parts And Labels; Optional Kits; Accessories - Nilfisk VHC110 Manual De Instrucciones

VHC110 - VHC120

Vacuum Cleaner Parts and Labels

1.
Identification plate which includes:
Model code, serial number, EC marking, year of
manufacture, weight (kg)
2. Dust container
3. Dust container release lever
4.
Inlet
5. Air outlet.
6. Castor locking lever.
7. Handle.
8.
Closing band lever.
9. Mechanical stop for liquids (L version).
10. Container for liquids (L version).
11. Inlet of the container for liquids (L version).
12. Plug for closing the side container (L version).
13. Warning plate.
Draws the operator's attention to the fact that the filter
must only be shaken when the vacuum cleaner is turned
OFF (see also par. "Primary filter shaker").
14. On/off valve.
This vacuum cleaner creates a strong air flow which is drawn
in through the inlet (4) and blows out through the outlet (5).
Before turning on the vacuum cleaner, fit the vacuum hose
into the inlet and then fit the required tool on to the end part
(refer to the manufacturer's accessory catalogue or Service
Centre).
The diameters of the authorized hoses are indicated in the
Technical data table.
The vacuum cleaner is equipped with a main filter which
enables it to be used for the majority of applications.
In addition to the primary filter that retains the most common
dust, a secondary filter (absolute filter) can be installed.
I
GB
E
E
C447

Vacuum cleaner description

Figure 1

Optional kits

1. Grill and depressor
2. Grille and valve
3. Immersion Separator
4. Liquids
5.
Pressure governor
Please contact the manufacturer's sales network for
information on other optional kits.
Instructions for installing the optional are included in the
conversion kit.
WARNING!
Use only genuine optional kits supplied and author-
ized by the manufacturer.
Optional kits must be installed by qualified Nilfisk
personnel.

Accessories

Various accessories are available; refer to the manufacturer's
accessory catalogue.
WARNING!
Use only genuine accessories supplied and authorised
by the manufacturer.

Packing and unpacking

Dispose of the packing materials in compliance with the laws
in force.
MODEL
Standard deck
Stainless steel
deck
(*) Weight with packing

Unpacking, moving, use and storage

Operate on flat, horizontal surfaces.
The load-bearing capacity of the surface the vacuum cleaner
is placed on must be suitable for bearing its weight).
4
Figure 2
A B C
kg (*)
mm mm mm
700 790 1500
700 790 1500
12/2017
53
53