Only connect the base (5) to a properly installed, easily
accessible wall outlet whose mains voltage corresponds to
that on the rating plate. After connecting the appliance, the
wall outlet must still be easily accessible so that you can
remove the mains plug quickly in the event of an emergency
Never immerse the base (5) in water or other liquids. If liquid
does penetrate the base (5), disconnect the mains plug from
the wall outlet immediately and contact our hotline (see
"Warranty information" section).
DANGER: Risk of fire
Fill the kettle (4) with at least 0.5l of water. If insufficient water
is added, there is a risk of fire due to overheating.
Maintain a clearance of at least 50 cm around the kettle (4) to
flammable and combustible materials. There is a risk of fire.
Copyright
All the contents of this user manual are protected by copyright and provided to the reader for
information only. Copying data and information without the prior explicit written consent of the
author is strictly forbidden. This also applies to any commercial use of the contents and information.
All texts and diagrams are up-to-date as of the date of printing. Subject to change without notice.
Before you start
Remove the SWKS 2200 C1 Stainless Steel Electric Kettle and all accessories from the packaging
and check that the package contents are complete. Remove all protective films. Keep the
packaging material away from children and dispose of appropriately.
SilverCrest SWKS 2200 C1
English - 61