Use a descaling agent suitable for coffee machines and other household appliances. Proceed
as described in the instructions for using the descaling agent.
After descaling, rinse the kettle (4) out multiple times with plenty of clean water.
Cleaning the scale filter (1)
A scale filter (1) is installed in the kettle (4) that needs to be cleaned from time to time. Clean the
scale filter (1) as follows:
Remove the cooled kettle (4) from the base (5).
Open the lid (10) by pressing the lid release button (9)
Carefully reach into the kettle (4),
take hold of the top edge of the
scale filter (1) and pull it upwards
out of the holder (2). Please note
that the holder (2) must not be
removed.
Place the scale filter (1) into a warm
descaling solution for household
appliances (e.g. for coffee
machines) for a few hours and then
rinse it well in clean water.
Replace the scale filter (1) by
inserting it into the lateral guides on
the holder (2) from above.
Close the lid (10) by pressing down on it until it clicks into place.
Storage when not using the product
If the kettle is not to be used for an extended period, store it in a clean and dry place.
Allow the kettle (4) to cool completely before storing it.
Wrap the power cord (7) around the cord wrap under the base (5) and store the kettle in a
safe and dust-free place.
Troubleshooting
If your kettle does not work as normal, follow the instructions below to try to solve the problem. If
working through the tips below does not fix the fault, please contact our hotline (see "Warranty
information" section).
SilverCrest SWKS 2200 C1
English - 65