Safety Guidelines For Battery Chargers; Original Accessories/Auxiliary Equipment; Information On Saw Blades; Before Use - Parkside PSSA 20-Li A1 Traducción Del Manual De Instrucciones Original

Safety guidelines for battery chargers

This appliance may be used by
■
children aged 8 years and above
and by persons with limited physical,
sensory or mental capabilities or
lack of experience and knowledge,
provided that they are under super-
vision or have been told how to use
the appliance safely and are aware
of the potential risks. Do not allow
children to use the appliance as a
toy. Cleaning and user maintenance
tasks may not be carried out by
children unless they are supervised.
To avoid potential risks, damaged
■
mains cables should be replaced
by the manufacturer, their customer
service department or a similarly
qualified person.
The charger is suitable for indoor use
only.
WARNING!
■ If the power cord requires replacement, this
should be carried out by the manufacturer or
an approved representative to avoid safety
hazards.
Original accessories/auxiliary
equipment
■ Use only the accessories and additional
equipment that are specified in the oper-
ating instructions and are compatible with
the appliance. Using attachments or accessory
tools other than those recommended in the oper-
ating instructions can lead to a risk of injury.
│ GB │ IE
■ 20

Information on saw blades

You can use any saw blade provided it is fitted with
a suitable mount – 1/2" (12.7 mm) universal shaft.
Saw blades optimised for your sabre saw are
available from retail stores in different lengths for
various purposes.
NOTE
► TPI = teeth per inch = the number of teeth
per 2.54 cm
Wood saw blade:
Dimensions: 150 x 1.25 mm, 6 TPI
Ideal for: sawing construction wood, chipboard,
panels and plywood, and also plunge cuts.

Before use

Charging the battery pack (see fig. A)
CAUTION!
► Always unplug the appliance before you
remove the battery pack from or connect the
battery pack to the charger.
NOTE
► Never charge the battery pack if the ambient
temperature is below 10°C or above 40°C.
If a lithium-ion battery is to be stored for an
extended period, the charge level should be
checked regularly. The optimum charge level is
between 50% and 80%. The storage climate
should be cool and dry and the ambient tem-
perature should be between 0°C and 50°C.
♦ Connect the battery pack
battery charger
♦ Insert the power plug into the socket.
The control LED
♦ The green LED indicates that the charging
process is complete and the battery pack
ready.
to the high-speed
(see fig. A).
lights up red.
PSSA 20-Li A1
is