Use As A Hedge Trimmer; Changing The Blades; Maintenance And Cleaning - FLORABEST FGS 10 A1 Traducción Del Manual De Instrucciones Original

Tijera cortacésped y arreglasetos recargable
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Gb
MT
axle click into place in the cor-
responding notches on the left
and right-hand side of the tool.
finger and thumb (clothes peg
grip) and remove the wheels.
Swinging the Equipment: Push the
catch (
6) on the right-hand side of
the blades. You can now tilt the blade
up and down.
Push the tool over the ground using
the wheels (
that you keep an even cutting height.
The telescopic shaft (
make work easier.
Grass is best cut when dry and not
too long.

Use as a hedge trimmer

Move the unit forward evenly.
The double-sided cutting heads en-
able cutting in both directions or by
swinging the unit from side to side.

Changing the blades

Remove the battery (7) from the unit
before changing the blades (11/12).
1. Press the two quick-release
catches (25) on the battery (7)
and pull the battery out of the unit.
2. Push the safety switch (26) on
the underside of the unit to „UN-
LOCK" and lift the blade cover
(27) off.
3. Remove the whole blade unit
(11/12).
56
To remove the
wheels (5), push
the wheels apart
using your index
5). This will ensure
20) will
4. Position the blade onto the unit.
Make sure the fixed blade plate
(28) points outwards. The re-
cesses on the blade fit onto the
pins in the equipment casing.
- Ensure that the foam padding
(30) is inserted correctly.
- If the blade drive (29) has
turned around, turn it by hand
until you can position the blades
(11/12).
5. Place the blade cover (27) onto
the unit and move the safety
catch (26) to „LOCK".
6. Place the battery (7) into the unit
again.

Maintenance and Cleaning

Leave any work not covered
in this manual to our Service
Centre. only use original parts.
There is a risk of injury!
Never use cleaning agents or sol-
vents, which can cause irreparable
damage to the unit. Chemicals can
attack the plastic components on
the unit.
Remove the battery (
the unit before servicing it.
Wear gloves when handling the
blades (
of injury from cuts!
Clean and service the unit regularly as fol-
lows. This guarantees a long life for your
unit:
7) from
11/12). There is a risk

Publicidad

Tabla de contenido
loading

Tabla de contenido