Technical Data; Replacement Parts - FLORABEST FGS 10 A1 Traducción Del Manual De Instrucciones Original

Gb MT
Please call our Service Centre by
phone if you have a valid guarantee
claim. They will give you further infor-
mation on return processing.
• Defective units returned to us will be
disposed of for free.

Technical data

Unit
Motor voltage . ...............................9.6 V
Protection class ..................................... III
Protection category............................IPX0
Grass-trimming blades
Width of blades .......................... 100 mm
Shrub-trimming blades
Length of blades ........................ 200 mm
Distance between teeth...........ca. 8 mm
Weight (without recharger) ............1.32 kg
Sound pressure level
(L
) . ................. 83 dB(A), K
pA
Sound power level (L
guaranteed .............................. 86 dB(A)
measured . ......84.3 dB(A); K
Vibration (a )
n
at handle ..............3.27 m/s
battery (NiMH)
Nominal voltage . .................9.6 V
Loading time ............................ max. 5-8 h
Recharger . .................................SI-12045
Voltage input . ..................... 230 V~, 50 Hz
Nominal consumption ....................... 12 W
Voltage output.................................... 12 V
Recharging current ....................... 450 mA
Performance output ........................ 5.4 VA
Protection class ................................. II
Protection category............................IPX0
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another. The stated
vibration emission value may also be used
for a preliminary exposure assessment.
58
=2.0 dB(A)
pA
)
wA
=1.5 dB(A)
wA
2 , K=1.5 m/s
1.3 Ah
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Safety precautions aimed at protecting
the user should be based on estimated
exposure under actual usage conditions
(all parts of the operating cycle are to be
considered, including, for example, times
during which the power tool is turned off
and times when the tool is turned on but is
running idle).
The noise and vibration levels have been
calculated according to the norms stated
in the conformity statement.
Technical and optical alterations to serve
progress may be made without notice.
All measurements, instructions and other
data given in this manual are therefore
given without guarantee of correctness.
Legal claims made on the basis of this
manual are therefore excluded.
2

Replacement parts

Replacement parts can be ordered di-
rectly from the manufacturer. Important:
please state the unit type and order
number when ordering.
Replacement battery .....................8000 1145
Recharger . ..........................................8000 1052
Grass shear blade, 10 cm ........1370 0000
Shrub shear blade, 20 cm ........1370 0020
If further spare parts should be neces-
sary, please find the part number on the
exploded drawing.