Hoshizaki DCM-230FE Manual De Instalación página 2

ENGLISH
IMPORTANT
1. In order to carry out safe and proper
installation of the product, please read
this booklet carefully beforehand and
follow the instructions contained within.
2. On completion of the installation, start the
ice dispenser to check for any abnormali-
ties, and instruct the user on how to use
and maintain the ice dispenser in accor-
dance with the Instruction Manual.
3. This booklet should be handed over to
the user after the installation and be
preserved by the user together with the
Instruction Manual for any further consul-
tation that may be necessary.
WARNING
The installation must be carried out by
qualified personnel, in accordance with
current regulations, according to the
manufacturer's instructions.
1. UNPACKING
WARNING
Children should not be allowed in reach of the
packaging elements (plastic bags and ex-
panded polystyrene) as they are potential
sources of danger.
CAUTION
Remove shipping carton, tape(s) and packing.
If packing material is left in the ice dispenser,
it will not work properly.
1) After removing the packaging, make sure that the
ice dispenser is in good condition. If in doubt,
please do not use the equipment but apply to
professionally qualified personnel.
2) Remove the Upper Front, Top and Side Panels to
prevent damage when installing the ice dis-
penser. See Fig. 1.
3) Remove the package of accessories, and check
the contents:
a) Installation Kit (DCM-230FE only)
Inlet Hose
Outlet Hose
1/2-3/4 Nipple
3/4-3/4 Nipple
b) Bracket (DCM-230FE only)
c) Fuse
4) Check for 10A, 1A and 0.5A spare fuses.
5) Remove the protective plastic film from the
panels. If the ice dispenser is exposed to the sun
or to heat, remove the film after the ice dispenser
cools.
Upper Front Panel:
Top Panel:
Apron/Side Panel:
1
2
1
2
2
3
2
Remove the screws. Pull
the bottom toward you.
Remove the Thumbscrew.
Lift up the front and push
away.
Remove the screws and
pull toward you.
Fig. 1
Fig. 2
91A2FB10A9907