Peaq PDR350BT-B Manual De Instrucciones página 62

ENGLISH
CD PLAYBACK
1. Open the CD tray by pressing
move the transport safeguard when
opening the CD tray for the first time.
2. Put one CD into the CD tray with the la-
bel side facing up.
3. Press to close the CD tray. The CD
will be read.
4. The total number of tracks on the CD is
displayed on the screen and will play the
first track automatically.
Note: Before you open the CD tray again, al-
ways press first to stop the CD from spin-
ning. To remove the CD, place one finger in
the middle of the CD and the other finger on
the edge of the CD. Carefully pull the CD out
of the tray.
Button Function
Playback/Pause
Stop playback
Track forward
Track backward
REPEAT FUNCTION
Press REPEAT to select the following repeat
modes:
• Repeat current track
• Repeat all files in the current folder (for
data CDs only)
• Repeat all tracks
Press REPEAT again to cancel the repeat
function.
62
IM_PDR350BT_1_150930_V04_HR.indb 62
RANDOM PLAYING
. Re- 1. Press RANDOM on the remote control
to play all tracks in random order
be appeared on the display.
2. Press
dom track.
3. Press RANDOM again to cancel random
function.
Note: RANDOM is only available in mode
USB and CD.
INTRO PLAYBACK
1. Press INTRO on the remote control to
playback the first 10 seconds of each
track. INTR appears on the display.
2. Press INTRO again to resume normal
playback.
Note: INTRO is only available in mode USB
and CD
PROGRAMME SETTING
The playback list can only be programmed
in stop mode. Up to 20 tracks can be pro-
grammed.
1. Press MEMORY to enter programming
mode and the track number 00 starts
flashing.
2. Press
select a track and confirm by pressing
ENTER.
3. Press to playback the first track of
the set program.
4. Repeat steps 1 to 3 to set more tracks.
CANCEL PLAYBACK LIST
In stop mode, press
or open the CD tray by pressing
will
to playback the next ran-
on the remote control to
to cancel the program
.
30/9/15 4:38 PM