Usb Mode; Media Player - Peaq PDR350BT-B Manual De Instrucciones

USB Mode

1. Press MODE on the product or CD/USB
on the remote control to access the Me-
dia Player.
2. Insert a USB Stick with MP3/WMA mu-
sic files into the USB port.
3. Select USB playback and choose open
USB folder.
4. For playback music track refer to chapter
CD Playback. If there is no USB device
connected, the message No USB found
will be displayed on the screen.
Note:
• Support USB drive up to max. 32 GB.
• Connect the USB device directly to the
USB port of your product. The usage of
an extension cord is not recommended
and may cause radio interference and
faulty data transfer. This product supports
USB 2.0 and 3.0
CHARGING EXTERNAL DEVICE
External devices can be charged via USB
with this speaker. Connect the device to the
USB port (output: 5 V / 1 A).
The USB charging is only supported during
ON mode.
Note: USB charging cable is not included
(please use cable provided with your exter-
nal device, if any)
IM_PDR350BT_1_150930_V04_HR.indb 63

Media Player

Your Internet radio supports the UPnP-Pro-
tocol "Universal Plug-and-Play" and DLNA
(Digital Living Network Alliance). You can
transfer audio files to your PC wirelessly to
your Internet radio if a UPnP software is in-
stalled. Using the UPnP / DLNA protocol, the
Internet radio can be used as Digital Media
Renderer (DMR). So you can play music files
from UPnP / DLNA compliant devices on the
Internet and radio, and, for example, adjust
the volume from the computer.
1. Press MODE on the product or CD/USB
on the remote control to select the Media
player.
2. Select Shared media to start the music
selection.
Repeat Mode
During Music Player mode, press PRESET
to select Repeat play and press EN-
TER button repeatedly to turn repeat play
on/off.
Shuffle Mode
During Music Player mode, press PRESET
to select Shuffle play and press EN-
TER button repeatedly to turn shuffle play on/
off.
Prune servers
During Music Player mode, press PRESET
button to select Prune servers and
press ENTER button to confirm.
Press PRESET
move servers that are no longer available.
Press ENTER button to confirm. Or select
NO to cancel.
ENGLISH
to select YES to re-
63
30/9/15 4:38 PM