Time And Date - Peaq PDR350BT-B Manual De Instrucciones

ENGLISH
NETWORK
Select this entry to display the list of net-
works with which the Internet radio can es-
tablish an automatic connection or select the
entry network assistant to search available
networks.
1. Press PRESET
work" and confirm by pressing ENTER.
Following options are available:
• Network wizard (Netzwerkassistenten)
SSID – select the desire wireless network.
Rescan – Scan for available networks.
Wired – select wired network.
Manual config – select wired/wireless net-
work with DHCP enable/disable.
PBC WLAN set up
Select PBC on the unit and press the
PBC button on the modem device that
you wish to connect with. Press the EN-
TER button to continue.
• View settings
Display the setting on the unit.
• Manual settings
Select wired/wireless network with DHCP
enable/disable.
• WLAN region
Select a country of your choice.
• NetRemote PIN Setup
To define a PIN number to be entered
before being able to connect to the unit
remotely over a network
• Clear network settings: To delete the
connected network memory in Network
profile.
• Keep network connected: To define
whether remains connected to its net-
work in Standby mode and when not in
Network radio mode. This is necessary
for remote operation and audio streaming
in Music Player mode.
66
IM_PDR350BT_1_150930_V04_HR.indb 66

TIME AND DATE

1. Press PRESET
Date" and confirm by pressing ENTER.
Following options are available:
• Auto update: Update from DAB / FM
• Set format: 12 / 24 hour format.
to select "Net- • Set time zone: Select a time zone.
• Daylight savings: Select daylight
You may also adjust the Time/Date manually.
1. Press CLOCK to access set Time/date.
2. The date digits flash on the display. Set
the
pressing PRESET
with ENTER.
Note: The default auto time update setting is
"Update from Network". If you would like to
manual set the time, it is recommended to
turn the Auto update function off.
INACTIVE STANDBY
Use the Inactive Standby to turn on the unit
after a certain time in play mode.
1. Press PRESET
"Inactive Standby" and confirm by
pressing ENTER. Following options are
available:
• Off (Off)
• 2 Hours
• 4 Hours
• 5 Hours
• 6 Hours
2. Select by pressing PRESET
confirm with ENTER.
to select "Time/
/ Network.
(Only available when Auto update
from Network is on.)
savings. (Only available when Auto
update from Network is on.)
date/month/year/hour/minute by
and confirm
to select
and
30/9/15 4:38 PM