Mem" Key - Minipa MDT-2245B Manual De Instrucciones

D "MEM" Key
During the measurement of RPM and surface speed, the
action key need to be pressed, in this moment the instru-
ment storage Maximum, Minimum, Last Measurement and
storage automatically a maximum of 99 measurements.
These values can be restored by "MEM" key. When you
finish the measurement, the stored values can be dis-
played doing the follow procedure:
1. Keep pressed "MEM" key for the first time to visualize
the maximum measured value, "UP" indication will be
displayed.
2. Keep pressed "MEM" key for the second time to visu-
alize the minimum measured value, "dn" indication will
be displayed.
3. Keep pressed "MEM" key for the third time to visu-
alize the last measured value, "LA" indication will be
displayed.
4. Keep pressed "MEM" key for the fourth time to visualize
how many positions are storaged in the memory, "An"
indication and how many measurements was storaged.
Loose and press again "MEM" key, the position and the
storaged value will be displayed, repeat this operation
to visualize other values.
5. After the last value be showed, press "MEM" key again,
"UP" indication will be displayed restarting the value
visualization process.
21