Preparing The Measurement - Hartmann Veroval Compact BPW 22 Instrucciones De Uso

4. Preparing the measurement

Positioning / changing the batteries
■ Open the battery cover on the bottom of the device (see Fig. 1). Insert
the batteries (see Chapter 11 - Technical Information). Ensure correct
polarity (+ and –) when inserting batteries. Close the battery lid.
or flashes on the display. Set date and time as described below.
■ If the 'Change battery' symbol
blood pressure can no longer be measured and you need to replace all
of the batteries.
Fig. 1
is permanently illuminated,
Setting the date and time
Be sure to set the date and time correctly. This is the only way
to save your measured values correctly with date and time for
subsequent retrieval.
■ To switch to Settings, reinsert the batteries or press the START/STOP
button for 5 seconds. Proceed as follows:
Hours
The hour format flashes on the display.
• Select the desired hour format using the Save
buttons / and confirm using the START /
STOP button .
59
English
EN